Repairs · Matthews, NC

HVAC Repair in Matthews

Compare licensed HVAC repair pros in Matthews, NC. Typical repair tickets run $641–$6,531.

8 pros rankedLicense-verifiedWritten estimates
On this page

Common HVAC repairs in Matthews

  • Heat pump not cooling on humid summer days — low refrigerant, frozen coil, or failing capacitor.
  • Furnace short-cycling in winter — dirty flame sensor, oversized equipment, or thermostat miscalibration.
  • AC blowing warm air — condenser-fan failure, tripped high-pressure switch, or refrigerant leak.
  • Uneven temperatures room-to-room — failing zone damper, duct leakage, or blower-motor issue.
  • Loud banging, squealing, or grinding from the air handler — bearings, belt, or blower-wheel imbalance.
  • Thermostat shows the right setpoint but the system won't start — control board, transformer, or wiring fault.
  • Water pooling at the air handler — clogged condensate drain or cracked pan.
  • Frozen evaporator coil that keeps icing over — airflow restriction or low charge.

Ranked shortlist

Request quotes →
  1. Formula Air Heating & Cooling storefront photo
    4.9 (3,706 reviews)Serves Matthews, NC
    What customers say
    Our furnace went out, and I called Formula Air expecting the usual warranty runaround and delays. Didn’t happen. They…
  2. MTB Mechanical storefront photo
    4.9 (4,569 reviews)Serves Matthews, NC
    What customers say
    Josh Newell was our Home Comfort Advisor, and he did an excellent job explaining all of our options in a professional…
  3. McClintock Heating and Cooling storefront photo
    5.0 (3,246 reviews)Serves Matthews, NC
    What customers say
    I’m extremely happy that I decided to give McClintock a call! We’d used another company over the last several years;…
  4. Helms Heating & Air Conditioning, Inc. storefront photo
    4.9 (1,276 reviews)Serves Matthews, NC
    What customers say
    We did a year of researching and interviewing companies before choosing Helms Heating & AC. What sold us was the people…
  5. Caryl Mechanicals storefront photo
    4.7 (1,180 reviews)Serves Matthews, NC
    What customers say
    Travis was amazing! He came out to install and set up my ecobee thermostat and sensors, and the experience was…
  6. Bud Matthews Services storefront photo
    4.8 (685 reviews)Serves Matthews, NC
    installationrepairinspectionemergency
    What customers say
    We would like to report how pleased we were with Bud Matthews Service dealing with a refrigerator ice maker. Another…
  7. Prime Comfort storefront photo
    Prime ComfortTop rated
    4.9 (389 reviews)Serves Matthews, NC
    What customers say
    We have had an outstanding experience with Prime Comfort HVAC, especially with Nick, who has been our technician for…
  8. Erbe Air storefront photo
    Erbe AirTop rated
    5.0 (222 reviews)Serves Matthews, NC
    What customers say
    I used Erbe Air to replace my gas pack around the storm weekend. They were already on my radar from their positive…

Repair vs replace: quick decision tree

  • Age > 15 years — Expect diminishing returns on any single repair. Start pricing replacement in parallel, especially if a second failure in the last 24 months.
  • Repair cost > 50% of replacement — A $2,500 repair on an $8,000 system rarely pencils. Run the 5-year math: repair cost + likely follow-on failures vs new-system financing.
  • Uses obsolete refrigerant (R-22) — R-22 is phased out; refills are both expensive and short-lived. Replacement is almost always the right call.
  • Failed a major component (compressor, heat exchanger) — These are “the system”. A compressor on a 12-year-old condenser is a replacement signal, not a repair.

Typical repair cost range

Matthews repair range$641 – $6,531per repair visit

Derived from local HVAC benchmarks in Matthews. Most repair tickets fall well below full-system pricing — expect simple swaps (capacitor, ignitor, thermostat) at the low end and major component replacements (blower motor, control board, compressor) at the high end.

Estimate your Matthews repair

Pick the repair type and your system's age for a ballpark range. Real quotes vary by part availability and diagnosis — use this as a sanity check before approving work.

What kind of repair is it?
How old is your system?

Frequently Asked Questions

  • How long does a typical HVAC repair take in Matthews?

    Most diagnoses take 30–60 minutes on site. Small repairs (capacitor swap, thermostat, ignitor) finish the same visit. Parts-on-order repairs can push the job 1–5 business days depending on supplier stock.

  • Do repairs come with a warranty?

    Labor warranties of 30–90 days are common; parts usually carry the manufacturer's warranty (1–10 years). Always get the warranty terms in writing on the invoice before the tech leaves.

  • How do I avoid common repair scams?

    Red flags: no written estimate before work starts, refrigerant refill with no leak search, blanket recommendation to replace without an inspection, or very high "after-hours" pricing on a non-emergency call. Two written quotes for any repair over $600 is the fastest sanity check.

  • When should I replace instead of repair?

    When the repair estimate exceeds 50% of a new system, or the unit is past 15 years, or it uses obsolete refrigerant (R-22), replacement usually wins the 5-year math. Otherwise repair is almost always the better call.

Licensing verified weekly. Reviews refreshed within the last 30 days.

Licensing data: North Carolina State Board of Examiners of Plumbing, Heating and Fire Sprinkler Contractors · Company data: verified business records + Google Business profile

Get Matthews repair quotes

Two or three written quotes is the fastest way to normalize a repair bill — we'll connect you with top-ranked local pros.

Compare HVAC Pros